Description
Type T Miniature Female Ceramic Thermocouple Connector
Type T Miniature Female Ceramic Thermocouple Connector – Compact Design
- Temperature Operating range of -328 to 662°F (-200 to 350°C)
- Excellent solution for Vacuum applications
- Flat Female pins are made from the thermocouple alloys and are Polarized with a larger width negative flat pin and smaller width positive pin to ensure proper connection.
- Terminal Contact washers provides an easy to use although secure thermocouple wire connection point. A molded internal barrier prevents short circuits.
- Maximum wire diameter .023″ (0.6 mm) typically 24 Gage solid wire.
- If larger diameter wires are being considered the wire conductors will need to be slightly flattened to allow the connector cap to fit flush with the connector body.
- Stainless Steel screws with a Combination Head Design accepting both Slotted and Phillips head screwdrivers.
- Connector Body dimensions can be viewed or printed by clicking on the following Type T Miniature Female Ceramic Thermocouple Connector Dimensions and are summarized as the following. 1.06″ (27 mm) long by .728″ (18.5 mm) wide by .378″ (9.6 mm) thick with a .177″ (4.5 mm) cable opening.
- Miniature Ceramic connectors are typically 1/16″ (.062 or 1.57 mm) Thicker and .098″ (2.5 mm) Wider than miniature plastic connectors resulting in a need of different accessories such as wire clamps. The ceramic connector are also slightly longer
- EvoSensors part number – T1X-FEMX-CON-FP-X-MCCF
- Location: A-4-22
Consider the following Accessories to complete your Connector System
